My cooker hood suddenly turns on or off
The remote control is pre-programmed and linked to your cooker hood. Sometimes it may happen that there is interference on your frequency from other broadcasters (for example the neighbour’s cooker hood, the garage door etc.) If this happens, you need to set the remote control to a different code. There are 10 codes available in all. View the demonstration video below or follow the instructions provided below.
Step-by-step instructions to change the code on the remote control
1. Determine which code is used:
Simultaneously press on/off and illumination button . The light on
the remote control will flash as many times as the
selected code.
2. To change the code:
- Simultaneously press the on/off and illumination buttons on the remote control (for about 3 seconds).
- The green light on the remote control will flash
as many times as the selected code. If you want a different
code, repeat this step again (1x flashes
for code 1, 2x flashes means code 2 etc. There
are 10 codes available all. - Simultaneously press the extractor hood and (about 10
seconds).
The second green indicator light on the extractor hood
flashes (release the buttons when it does so). - Within 10 seconds press the
button on the remote control to set the confirmation.
Other question?
Discover our Novy products
Find a sales outlet near you